Skip to content

Quick Search

Search DEVKEY BLOG

Go back
Devkey

M.2 SSD disappearing during games stopped after a firmware update

My Samsung 990 PRO M.2 SSD would sometimes suddenly stop reading and writing during games. Sometimes Windows still did not see that SSD after a reboot. Rebooting once more, or shutting the PC down and starting it again, would usually bring it back.

  1. My Samsung 990 PRO M.2 SSD would sometimes suddenly stop reading and writing during games.

    Sometimes Windows still did not see that SSD after a reboot. Rebooting once more, or shutting the PC down and starting it again, would usually bring it back.

  2. Windows Event Viewer showed stornvme controller errors, disk Event ID 51, and Ntfs write failures around the M.2 SSD.

  3. The only thing I changed was updating the SSD firmware in Samsung Magician.

    It was 4B2QJXD7 before the update and 8B2QJXD7 after it.

    On Samsung’s official Samsung Storage Firmware page, the note for 7B2QJXD7 says: “To address the intermittent non-recognition and blue screen issue.” The note for 8B2QJXD7 says: “To improve read-operation stability.” In other words, a firmware newer than my previous 4B2QJXD7 had already targeted a symptom very close to what I was seeing.

    Reference: Samsung Storage Firmware

  4. So far, the SSD has not disappeared or stopped reading and writing during games again.


Text-first cards so you can decide what to read next.


Next Short
SAND: Raiders of Sophie BattlEye launch error fixed after a reboot